A flush TV bracket is equivalent to a panel with several slots. The TV brackets are used to flush-mount the TV onto the wallboard. The panel is installed flush with the wallboard and the connection between the panel and the wallboard is plastered to create a uniform appearance on the wall. The TV can be mounted on the brackets and it will appear to be attached directly to the wall giving a cinematic effect to the room. This is accomplished by having the TV wall brackets flush against the wall and the TV hanged on the brackets of the mount. The space between the TV and mount can be fairly small, making the attachments barely unnoticeable. There are many models and types of TV wall brackets, and you should select a TV bracket that can hold the size and weight of the flat screen panel. The flush TV wall bracket is considered the simplest TV bracket to fit and install.
Prepare your tools and equipment before doing the installation. It is more difficult looking for a particular tool when you are in the middle of the installation process, and everything is askew in the room. The normal tools would be a level, stud finder, pipe and cable finder, drill with appropriate drill bits, nut and bolt wrench, epoxy glue and screwdrivers. All these tools might not be required but it is better to have them readily available should you need them. The level is to ensure the TV wall mount is even and straight on the wall. People without levels might use measuring tapes to get the exact distances and ensure the holes are straight and equidistant. The stud finder is used to find studs behind a wooden wall. If you are attaching to a cement or brick wall, you might not need it. The pipe and cable finder will help you locate cables and pipes behind the wall, ensuring you don't accidentally drill into them.
Tv Wall Bracket
The drill will facilitate your putting the holes into the walls. People who don't have drills use a hammer and nail to put holes in the wall. The wrench and screwdrivers are necessary to tighten the bolts and screws on the TV wall bracket and the TV onto the arms of the bracket. When you are ready, place the longer horizontal wall plate flush against the wall and mark the fixing point with an indelible marker. Be sure the wall mount is pressed against the wall, and is even and level to the floor and ceiling. There should be about six drill holes to fit the back plate to the wall. If your wall is wooden, make sure there are studs behind the wall where the holes are positioned. Plasterboards are not strong enough to hold the weight of the TV bracket and television. When drilling into the wall, be sure you avoid any pipes or cables that are behind the walls.
Once the holes are drilled, put epoxy glue into the holes and insert the six wall plugs. Screw the back plate to the wall ensuring everything is securely tightened. The glue is optional but highly advisable. It helps strengthen the hold of the screws onto the studs or block wall and minimizes the risk of the TV wall mount being ripped off the wall. Put the TV face down on a soft surface and fix the two bracket arms to the back of the television, tightening the bolts in place with washers and spacers, as needed. There should not be any problem placing the television on the wall mount as most, if not all television and wall mount manufacturers follow VESA standards. Be sure the cables and power wires are connected before hooking the TV over the wall plates. The process of installing the TV flush mount bracket is the same on wood and block walls. The main difference is the material the TV mount will be attached to. The same precautions should be followed, which is to ensure the TV wall bracket is firmly secured on studs or cement blocks.
Special Price!!! Cheetah Mounts AS3S 3 Shelf Wall Mount Bracket for LCD, LED and Plasma TV with Cable Management System
Oct 18, 2011 00:57:15
Click for larger image and other views
Cheetah Mounts AS3S 3 Shelf Wall Mount Bracket for LCD, LED and Plasma TV with Cable Management System Feature
- Holds 70LBS
- Cable Management
- Aluminum and Glass Construction
- Easy Assembly
- Drywall or Stud installation
Cheetah Mounts AS3S 3 Shelf Wall Mount Bracket for LCD, LED and Plasma TV with Cable Management System Overview
The AS3S is a tri-shelf cable management system. It can be used with or without a Plasma/LCD mount. This unit is designed to fit under your display and provide an on wall solution for other components such as cable boxes, DVD players, game consoles, and stereo components. There are three 2.25-Inch holes on the aluminum plate that allow you to cleanly run your cables up to your TV or down to another component, as well as out the bottom to an outlet. After reviewing our competition we realized that most shelving units need to be mounted directly into a wall stud. In most cases the wall stud is placed to the right or to the left of the display, which is not where most people prefer to have their shelves mounted. This is still the most secure option however, after significant research we’ve found that using the correct toggle bolts can allow you to mount your shelving unit wherever you see fit. With the combination of four of these toggle bolts the shelving unit is able to hold well over 70LBS safely. Each individual toggle bolt provides 75LBS of support. Please note that a good toggle bolt is still only as good as the quality of the drywall it is mounted into. If you have water damage or .25-Inch drywall please add a support for your shelving unit.SAVE NOW on the special offers below!
Available In Stock. |
| This Cheetah Mounts AS3S 3 Shelf Wall Mount Bracket for LCD, LED and Plasma TV with Cable Management System ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
